Durable, weather-resistant & made to stay put!
Best for: car windows, mirrors, glass, plastic, metal, tumblers (not dishwasher-safe after application).
Not ideal for: fabric, textured silicone, flexible plastic, or uneven surfaces.
How to apply:
Clean your surface with rubbing alcohol and a lint-free cloth. Let it air dry completely.
Carefull
Durable, weather-resistant & made to stay put!
Best for: car windows, mirrors, glass, plastic, metal, tumblers (not dishwasher-safe after application).
Not ideal for: fabric, textured silicone, flexible plastic, or uneven surfaces.
How to apply:
Clean your surface with rubbing alcohol and a lint-free cloth. Let it air dry completely.
Carefully peel off the clear plastic backing, leaving the design on the clear transfer film.
Carefully place the decal sticky-side down on your surface. These are permanent — be sure of the placement!
Rub firmly over the entire design using your fingers, a scraper, or the edge of a credit card.
Slowly peel away the clear film, starting from one corner at a sharp angle.
If any part of the decal lifts, stop peeling! Press it back down, rub firmly again, and continue peeling slowly.
Need to remove it? UV DTF decals are designed to last — but you can remove them with a little effort:
Warm the decal using a hair dryer for 30–60 seconds to loosen the adhesive.
Gently peel it off using your fingernail or a plastic scraper.
Use rubbing alcohol or Goo Gone to clean up any residue.
Phone grips are 3M adhesive-backed.
Clean the back of your phone or case with the included alcohol wipe and let it dry.
Test placement before removing the backing. Popular positions: centre-lower third or offset for texting.
Peel off the backing and stick the grip down firmly.
Hold for 15–30 seconds, then let cure for 1+ hour before using.
Not
Phone grips are 3M adhesive-backed.
Clean the back of your phone or case with the included alcohol wipe and let it dry.
Test placement before removing the backing. Popular positions: centre-lower third or offset for texting.
Peel off the backing and stick the grip down firmly.
Hold for 15–30 seconds, then let cure for 1+ hour before using.
Not recommended on soft silicone or textured cases. Adhesive is strong but not reusable.
Used to attach keychains, bookmarks & more to their packaging.
How to remove:
Gently pick at the edge of the sticky dot using your fingernail or roll your finger over it to lift it off.
For leftover residue:
Use a cloth or cotton swab with rubbing alcohol and rub very gently.
For stubborn dots:
Use a small dab of Goo Gone, let sit, then wipe cl
Used to attach keychains, bookmarks & more to their packaging.
How to remove:
Gently pick at the edge of the sticky dot using your fingernail or roll your finger over it to lift it off.
For leftover residue:
Use a cloth or cotton swab with rubbing alcohol and rub very gently.
For stubborn dots:
Use a small dab of Goo Gone, let sit, then wipe clean.
Avoid harsh chemicals on resin, glass, printed or painted surfaces.
Made with a high quality, food-grade & skin-contact safe, UV and heat resistant slow-cure art epoxy.
Wipe clean with a soft, damp cloth — no soaking or harsh scrubbing.
Not dishwasher safe.
Avoid placing extremely hot items like pots or pans directly on them (hot drinks, mugs, glasses or bowls are fine).
Store flat to prevent warping over tim
Made with a high quality, food-grade & skin-contact safe, UV and heat resistant slow-cure art epoxy.
Wipe clean with a soft, damp cloth — no soaking or harsh scrubbing.
Not dishwasher safe.
Avoid placing extremely hot items like pots or pans directly on them (hot drinks, mugs, glasses or bowls are fine).
Store flat to prevent warping over time.
Indoor use recommended — prolonged direct sun exposure can cause slight yellowing.
Heat Resistance:
The resin I use is heat-resistant up to 450°F (232°C) once fully cured.
That means:
Coasters and trays can safely handle hot drinks and warm serving dishes. Ashtrays are totally safe for use with both cannabis and cigarettes.
Avoid open flame contact and don’t place any resin piece directly on a stovetop or burner.
Glittered using dishwasher-safe Mod Podge + sealed multiple times.
Hand wash only with cool water and mild soap.
Use a soft cloth or sponge — no scrubbing or soaking.
Avoid dishwashers and microwaves.
Drink from the undecorated rim only.
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.